High Quality HDPE PP PPR Pert Pipe Extrusion Line/ HDPE PP PPR Pert Pipe Production Line/ HDPE PP PPR Pert Pipe Making Machine

• Customization: Available
• Type: Pipe Extruder
• Plastic Processed: PPR
• Feeding Mode: One Feed
• Assembly Structure: Integral Type Extruder
• Screw: Single-Screw
• Engagement System: Full Intermeshing
• Screw Channel Structure: Deep Screw
• Exhaust: Exhaust
• Automation: Automatic
• Computerized: Non-Computerized
• Transport Package: Film and Wood Package
• Specification: 16-63
• Trademark: Wings
• Origin: Qingdao
• HS Code: 84772090
• Production Capacity: 100 Lines/Year

Product Description

Qingdao City PE PP PPR pipe production line / extrusion machine / PPR pipe making machinery

PPR pipe production/extrusion line / PPR pipe making machinery is used to produce PPR pipes for cold and hot water supply in house. It's composed of vacuum feeding machine, hopper dryer, single screw extruder, mould, make line co-extruder, vacuum calibration and cooling tank, extended spraying cooling tank, haul off machine, printer, cutter and stack bracket.

Main advantages:

1. Barrier type screw, by which the material can get good plasticizing at low temperature but high extrusion output.
2. Barrel with feeding groove, material is 38CrMoAl and nitrogen treated, surface hardness is HRC 65-68, which can has a long use life.
3. Millipore type mould with suitable inner compression ratio which can guarantee to produce high quality PPR pipes.
4. High automatic level. The production line is controlled by PLC(touch screen). All parts, like extruder, haul off unit, cutter etc can be controlled by touch screen synchronously.

Model	PP-R-32	PP-R-110
Specifications of extruder	SJ65/30	SJ90/30
Pipe Type(mm)	φ16- φ 63	φ 75- φ 110
Production line speed(m/min)	≥ 10	≥ 5
Air pressure(≥ 0.6MPa)(m3/min)	0.3	0.5
Cooling water flow rate(m3/h)	2	8
Total power(kw)	55	120
Dimension(mm)	20000*4000*1700	30000*5000*1750
Weight(kg)	3500	4500

 

Single Screw Extruder
There is 45/33,65/30,65/33,75/30,75/33 ... etc extruders according diameters and ouput.

High production capacity of extrusion on the high quality basis. Lower temperature plasticizing design, ensure high quality sheet extrusion. Material of screw and barrel: 38CrMoAlA, nitrogen quenched (0.4-0.7mm ), Rigidity of screw: >740 , Rigidity of barel >940, the surface of screw is chromeplated Feeding bush with water cooling system

Pipe Extrusion Die head

The die head is made by 40Cr moulds materials.
Using mica heating way

Pipe Vacuum Tank

It is adopted stainless steel materials, high quality vacuum and water pumb. There is flow stabilization system for better pipe surface.

Water cooling tank

it is stainless steel materials.
It could be water leaching cooling way or water spray cooling way according pipe diameters and extrusion speed.

Hual off units

It could be rubber belt or rubber block clamping way.
2 claw, 3 claw, 4 claw ,6 claw, 8 claw, 12 claw made according pipe diameters.

Cutting Machine

Always it is no dust cutting way. The blades will cut the pipe by rotating way with pneumatic powder

 

Stacking Machine

Length 6000mm
Stacking way:Pneumatic way

 

 

Small Pipe Winding Unit

It could be double wheel or single wheel winding according pipe diameters. Always 10-40mm will use double wheel like the photo.

Bigger Pipe Winding Unit

It could be used for 16-63mm or 50-110mm diameters

Markline Extruder

Always PPR pipe, HDPE water pipe needs the markline extruder to produce a blue or red markline on pipe surface.